Descripción
Marca | TP-Link |
Modelo | SG2452LP |
Puertos | – 32 × 10/100/1000 Mbps PoE+ RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) – 16 × 10/100/1000 Mbps non-PoE RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) – 4 × Gigabit SFP Slots Puertos PoE (RJ45) – Standard: 802.3at/af compliant – PoE+ Ports: 32 Ports (up to 30 W PoE Output per Port) – PoE Power Budget: 230 W |
Rendimiento | – Capacidad de Conmutación: 104 Gbps por Unidad – Tasa de Reenvío de Paquetes: 77.37 Mpps – Tabla de Direcciones MAC : 16 K – Memoria del Buffer de Paquete: 12 Mbit – Jumbo Frame: 9 KB |
Software | Calidad de Servicio – 802.1p CoS/DSCP priority – 8 priority queues – Priority Schedule Mode: SP (Strict Priority), WRR (Weighted Round Robin) – Queue Weight Config – Bandwidth Control: Port/Flow-based Rating Limit – Smoother Performance – Storm Control: Multiple Control Modes(kbps/ratio), Broadcast/Multicast/Unknown-Unicast Control Características L2 y L2+ – 16 IP Interfaces: Support IPv4/IPv6 Interface – Static Routing: 32 IPv4/IPv6 Static Routes – DHCP Server – DHCP Relay DHCP Interface Relay DHCP VLAN Relay – DHCP L2 Relay – Static ARP – Proxy ARP – Gratuitous ARP – Link Aggregation – Spanning Tree Protocol – Loopback Detection – 802.3x Flow Control – Mirroring – Device Link Detect Protocol (DLDP) – 802.1ab LLDP/ LLDP-MED Multicast L2 – 511 IPv4, IPv6 shared multicast groups – IGMP Snooping – Multicast VLAN Registration (MVR) – Multicast Filtering – Limited IP Multicast (256 profiles and 16 entries per profile) Características Avanzadas – Automatic Device Discovery – Batch Configuration – Batch Firmware Upgrading – Intelligent Network Monitoring – Abnormal Event Warnings – Unified Configuration – Reboot Schedule VLAN – VLAN Group: Max. 4K VLAN Groups – 802.1Q tag VLAN – MAC VLAN: 12 Entries – Protocol VLAN – GVRP – Voice VLAN Lista de Control de Acceso – Support up to 230 entries – Time-based ACL – MAC ACL – IP ACL – IPv6 ACL – Combined ACL – Rule Operation: Permit/Deny – Policy Action: Mirroring Redirect Rate Limit QoS Remark – ACL Rules Binding Port Binding VLAN Binding Seguridad – IP-MAC-Port Binding – AAA – 802.1X: Port based authentication MAC (Host) based authentication Authentication Method includes PAP/EAP-MD5 MAB Guest VLAN Radius authentication and accountability support – IP/IPv6-MAC Binding 512 Binding Entries DHCP Snooping DHCPv6 Snooping ARP Inspection ND Detection – IP Source Guard 253 Entries Source IP+Source MAC – IPv6 Source Guard 183 Entries Source IPv6 Address+Source MAC – DoS Defend – Static/Dynamic/Permanent Port Security: Up to 64 MAC addresses per port – Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode – Port Isolation – Secure web management through HTTPS with SSLv3/TLS 1.2 – Secure Command Line Interface (CLI) management with SSHv1/SSHv2 – IP/Port/MAC-based access control IPv6 – IPv6 Static Routing and ACL – IPv6 Dual IPv4/IPv6 – IPv6 Interface – Multicast Listener Discovery (MLD) Snooping – IPv6 neighbor discovery (ND) – Path maximum transmission unit (MTU) discovery – Internet Control Message Protocol (ICMP) version 6 – TCPv6/UDPv6 – IPv6 applications: DHCPv6 Client, Ping6, Tracert6, Telnet(v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP MIBs – MIB II (RFC1213) – Bridge MIB (RFC1493) – P/Q-Bridge MIB (RFC2674) – Radius Accounting Client MIB (RFC2620) – Radius Authentication Client MIB (RFC2618) – Remote Ping, Traceroute MIB (RFC2925) – Support TP-Link private MIBs – RMON MIB(RFC1757, rmon 1,2,3,9) |
Especificaciones
|
– Cantidad de Ventiladores: Sin ventilador
– Bloqueo de Seguridad Físico – Fuente de Alimentación: 100-240 V AC~50/60 Hz – Montaje en rack – Consumo de potencia máximo: 304.5W (110 V/60 Hz) (con 230 W PD connected) – Disipación máxima de calor: 1035.4 BTU/hr (110 V/60 Hz) (con 230 W PD connected) Gestión – Omada App: Requiring the use of the Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. – Gestión Centralizada Omada Cloud-Based Controller Omada Hardware Controller Omada Software Controller – Acceso a la nube: Requiring the use of the Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. – Aprovisionamiento sin contacto: Requiring the use of the Omada Cloud-Based Controller. – Funciones de gestión: Web-based GUI Command Line Interface (CLI) through telnet SNMPv1/v2c/v3 SNMP Trap/Inform RMON (1,2,3,9 groups) SDM Template DHCP/BOOTP Client Dual Image, Dual Configuration CPU Monitoring Cable Diagnostics EEE SNTP System Log Certificaciones – CE – FCC – RoHS Requisitos del sistema – Microsoft Windows 98SE, NT, 2000, XP – Vista or Windows 7/8/10/11 – MAC OS, NetWare®, UNIX® or Linux. Factores Ambientales – Temperatura de Operación: 0 ºC a 40 ºC – Temperatura de almacenamiento: -40 ºC a 70 ºC – Humedad de funcionamiento: 10–90% HR sin condensación – Humedad de almacenamiento: 5–90% RH sin condensación Dimensiones – 440 × 330 × 44 mm Contenido
– SG2452LP – Power Cord – Quick Installation Guide – Rackmount Kit – Rubber Feet |
Fecha de revisión | 24-09-2024 por RTY |
Valoraciones
No hay valoraciones aún.